FL-AUX-COOL
Closed-Loop Cooling System
Two-circuit cooling with a plate heat exchanger, deionised internal loop and evaporative or dry cooling tower — the single most important accessory for furnace life.
Read More →
Auxiliary Equipment & Spares · FL-AUX-REF
Induction Furnace Lining Refractory, Formers and Ramming Equipment
Silica, alumina and magnesia ramming mixes matched to your alloy, with steel formers, vibrators and a written sintering procedure.
- Chemistry matched to your alloy, not a generic mix
- Written sintering curve for your exact furnace size
- Formers, vibrators and tools supplied with the furnace
- First lining installed and sintered by our commissioning engineer
- Lining thickness monitoring guidance to predict change-out
- Silica mix
- SiO₂ ≥ 98%, for cast iron and carbon steel
- Alumina mix
- Al₂O₃ ≥ 90%, for alloy and stainless steel
- Magnesia mix
- MgO ≥ 90%, for manganese steel and high-slag duty
- Service temperature
- 1,650 – 1,800 °C depending on mix
- Typical lining life
- Alloy, temperature and practice dependent
- Supplied with
- Steel former, vibrator, ramming tools, sintering curve
- Training
- First lining installed by our engineer, second by your team under supervision
Product Details
Lining life determines how many hours a furnace actually melts. The right refractory chemistry for your alloy, rammed at the right density and sintered on the right curve, will run far more campaigns than a mismatched lining installed by eye.
We supply silica mixes for cast iron and carbon steel, alumina for stainless and alloy steels, and magnesia or spinel for manganese steel and high-slag duties. Each shipment comes with the sintering curve for that mix and that furnace size — the single document most often missing when a customer buys refractory locally.
Steel formers, pneumatic vibrators and the ramming tools are supplied with the furnace, and our commissioning engineer installs and sinters the first lining while your operators do the second under supervision.
More Auxiliary Equipment & Spares
FL-AUX-HYD
Hydraulic Tilting Station
Twin-cylinder hydraulic tilting with proportional speed control, mechanical safety lock and emergency hand pump for controlled pouring at any capacity.
Read More →FL-AUX-CAB
Water-Cooled Cables & Capacitors
Flexible water-cooled cables, electrothermal resonant capacitors, thyristor and IGBT modules, fuses and control boards, referenced to your machine serial number.
Read More →Tell us what you melt.
Send your alloy, target output per hour, working hours and grid voltage. You will get a capacity recommendation, a plant layout and a firm quotation — normally within three working days, no obligation.