FL-IH-BIL
GTR Billet Induction Heating Furnace
GTR series through-heating line for round and square billets, with pyrometer control, hot and cold reject gates and press synchronisation.
Read More →
Induction Heating Systems · FL-IH-HRD
CNC Induction Hardening and Tempering Machine for Shafts and Gears
Scan or single-shot hardening with servo traverse, integrated quench and closed-loop power control — repeatable case depth on shafts, gears and rails.
- Recipe-controlled case depth — same machine, many part numbers
- Per-part data logging for automotive and rail traceability
- Integrated quench with flow, temperature and concentration monitoring
- Scan or single-shot in one machine
- Optional in-line tempering station
- Part diameter
- 10 – 600 mm
- Part length
- Up to 3,000 mm (scan hardening)
- Case depth
- 0.5 – 8 mm, recipe controlled
- Power supply
- IGBT, 50 – 500 kW, 5 – 200 kHz
- Traverse
- Servo, 0.1 – 50 mm/s, ±0.1 mm positioning
- Quench
- Integrated polymer or oil quench with flow and concentration control
- Data
- Per-part logging of power, speed, temperature and quench
Product Details
Induction hardening heats a surface layer above the transformation temperature and quenches it immediately, leaving a hard case over a tough core. Case depth is set by frequency and power, so the same machine can produce a shallow case on a gear tooth or a deep one on a rail head by changing the recipe.
The machine uses a servo-driven vertical traverse with the coil and quench ring on one carriage, scanning a rotating part. Power, scan speed, rotation and quench flow are all recipe parameters logged per part, which is what an automotive or rail customer needs for traceability.
Single-shot hardening for short parts and CNC scan hardening for shafts up to 3 m are both available, with an optional integrated tempering station.
More Induction Heating Systems
FL-IH-END
Bar End Heating Machine
Heats only the section to be formed — hand tools, axles, anchor bolts and eye bolts — cutting energy per part sharply versus full-length heating.
Read More →FL-IH-QT
Induction Quenching & Tempering Line
In-line hardening plus tempering in a single continuous pass — for steel strand, PC bar, drill rod, grinding rod and tube, with per-zone temperature control.
Read More →FL-IH-PIP
Pipe & Plate Heating Line
In-line heating for pipe coating, bending, normalising and plate hot-forming, with continuous throughput and zone temperature control.
Read More →Tell us what you melt.
Send your alloy, target output per hour, working hours and grid voltage. You will get a capacity recommendation, a plant layout and a firm quotation — normally within three working days, no obligation.